Maintenance And Care; Troubleshooting - Aerial 5310-0016 Mode D'emploi

Empty completely before transport
and dismantling
The pump must be completely emptied
before transporting the dehumidifier and
every time the pump kit is dismantled.
WARNING! Electrocution!
Before dismantling the pump kit and

before transporting the dehumidi-
fier, always make sure that the con-
densate water has been completely
pumped out first.
Procedure
1. Make sure that the dehumidifying
function on the dehumidifier has
been stopped.
2. Press and hold down the button for
manual pump out until no more con-
densate water comes out of the con-
nected hose.
9

Maintenance and care

ATTENTION! Damage to property!
Cleaning agents can damage sur-

faces. Only use mild detergents.
Only use approved original spare

parts.
Cleaning and inspection
Procedure
1. Switch off the dehumidifier.
2. Disconnect the mains plug on the
dehumidifier.
3. Remove the pump kit from the de-
humidifier.
4. Wipe the drip tray using a dry cloth
and perform checks.
5. Check the hoses.
6. Using the pump kit again.
7. Plug in the power cable for the de-
humidifier.
8. Switch on the dehumidifier if neces-
sary.
Spare parts and customer service
If you have any questions about the
pump kit or require spare parts, contact
your authorised dealer or AERIAL Ser-
vice.

10 Troubleshooting

Please check the following points in the
event of a fault. If necessary contact
AERIAL Service.
WARNING! Risk of injury and burns
during maintenance work!
Each time the pump kit is installed

or removed, ensure that the safety
relay for
switched off and the mains cable is
disconnected.
Only allow the manufacturer or au-

thorised personnel to carry out re-
pairs and maintenance work.
In the event of malfunctions, switch

off the product and secure it so that
it cannot be switched back on again.
Allow any hot components to cool

sufficiently before working on them.
15
the dehumidifier is