Limitation; Connecting The Remote Control - Sony IPELA RM-NS10 Manuel D'installation

Limitation

• You can only perform one operation at a time with the
remote control. (For example, you cannot adjust the
zoom while controlling the pan or tilt at the same
time.)
• The joystick is a precision instrument. Do not use
excessive force on it during operation, as this may
result in damage.
• The RM-NS10 is designed to be used indoors. Avoid
outdoor use.
• Use in areas with excessive smoke, steam, moisture, or
dust may result in damage.
Connecting the Remote
Control
Use the USB cable of the RM-NS10 to connect it to the
NSR or the computer you have selected to use for
monitoring.
The RM-NS10 draws power from the USB connector to
which it is connected. The POWER LED lights orange
when you connect it. Wait until the LED turns green
before using the remote control.
Caution
You cannot connect the RM-NS10 to low power USB
ports (such as on bus-powered hubs).
Notes
• The RM-NS10 draws power from the USB connector
to which it is connected.
• When you connect it, the RM-NS10 is recognized as a
keyboard.
Limitation / Connecting the Remote Control
5