Panasonic ER-GB96 Manuel D'utilisation page 12

Comb attachment [ ]
C
Indicator 21 • 22 • 23
Trimming
mm 21 21.5 22 22.5 23 23.5 24 24.5 25 25.5
height
(mm)
inch 53/6427/3255/6457/6429/3259/6415/1631/3263/64 1
(estimate)
Indicator 26 • 27 • 28
Trimming
mm 26 26.5 27 27.5 28 28.5 29 29.5 30
height
(mm)
inch 33/3267/6417/1669/6471/64 9/8 73/6437/3219/16
(estimate)
Trimming to an even length
Holding the appliance with the
power switch facing outwards,
trim by bringing the blade in
contact with the skin and moving
the appliance against the flow of
the beard.
Detail trimming attachment
• The trimming height cannot be adjusted.
►How to use the detail trimming attachment
Slide the detail trimming
attachment to switch the position
of the blade to be exposed
depending on the location to cut.
12
ER-GB96中南美 v10.indb 12
• 24 • 25 •
C
• 29 • 30
►Trim the beard in tight sections or to detailed form
Move the blade along the skin to
trim.
Without the attachment
(Trimming height: approx. 0.5 mm (1/64˝))
• The appliance cannot trim hair to lengths less than 0.5 mm
(1/64˝).
►Trimming the downy hair
Holding the appliance with the
power switch facing outwards,
trim by bringing the blade in
contact with the skin.
►Design precise lines
1
Place the blade at a right angle
on the edge of where you want
to make a precise line.
2
Move the blade away and
down from the area you
want to leave, and cut the
remaining beard.
18/5/9 上午8:56