Athena GET RX1 PRO Guide D'installation page 2

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before
using the GET RX1 PRO ECUs. Failure to read and/
or observe the instructions and warnings can lead to
incorrect use of the device or its malfunction, resulting in
product damage and personal injuries.
RX1 PRO KIT IS INTENDED ONLY AND EXCLUSIVELY
FOR RACING USE.
GENERAL WARNINGS
1. Follow the instructions described in this manual to prevent
vehicle damages.
2. Do not modify or replace the material supplied by GET.
3. Always make sure that no installed part can interfere with the
hot parts of the engine, the steering components or with the rider.
4. The product is not a toy. Keep it out of the reach of children
and/or animals as it contains small sized components that
could be swallowed.
5. Do not use the product for purposes other than those
specified in these instructions.
6. Do not use high pressure washers on the product.
SPECIFIC WARNINGS
1. Always make sure that RX1 PRO ECU is properly installed and
functional prior to use.
2. Never expose the device to temperatures above 70°C /158°F.
3. Install it when the engine is cold.
4. RX1 PRO ECU may not work properly if the OEM TPS sensor
is damaged or modified.
EN
2