VOLTCRAFT 513910 Mode D'emploi page 51

6. Function tabs
7. Data entry table
8. Clear Table
9. Run / Stop
10. Running Cycle
11. Table
Description
12. Table Name
13. Import
14. Export
15. Save
16. Delete
17. Print
18. Output on / off
19. Setting
20. Status
50
Switch the function of the window on the right-hand side between:
• External timed program
• Internal preset memory
• Data log
• Setting
The data entry field for the external timed programming function. The maximum
number of actions is 20.
Clear all the data in the data entry table for the external timed programming
function.
Run / Stop the external timed program according to the values in the data
entry table.
The number of cycle that the timed program is going to run. The value is valid
from 0 – 999, where 0 means an infinite cycle.
A text field for entering a table description.
A text field for entering a name for the table. You can also select a saved table
here; click the down arrow at the right and select it from the drop-down list.
Import a saved table from an excel file.
Export table name, table description and data entry table to an excel file.
Save the table name, table description and data entry table.
Delete the current set of the table name, table description and data entry
table.
Print the table name, table description and data entry table.
Show the status of the power output. You can also click on it to enable / disable
the power output of the power supply.
You can read the voltage setting and current limitation of the power supply.
You can read the present voltage, current and power output of the power
supply. V-const is equivalent to the C.V. indicator; I-const is quivalent to the
C.C. indicator.