Publicité
Les langues disponibles
Les langues disponibles
4.4 Residual heat indicator
WARNING!
As long as the indicator is on,
there is a risk of burns from
residual heat.
The indicator
appears when a cooking
zone is hot.
The indicator may also appear:
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
42
ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
5.3 The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
5.4 Activating and deactivating the
outer rings
You can adjust the surface you cook to the
dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the sensor
field. The indicator comes on.
To activate more outer rings: touch the
same sensor field again. The subsequent
indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
When you activate the zone but
do not activate the outer ring the
light that comes out from the
zone may cover the outer ring. It
does not mean that the outer
ring is activated. To see if the
ring is activated check the
indicator.
5.5 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for
Publicité
