Sony XM-5ES Mode D'emploi page 13

 6-channel input
With "Speaker Connection" (page 14)  or .
FRONT
AUDIO *
OUT
INPUT MODE
CH 1-4 SUB CH
+ +
1-4 1 3/2 4 5 3+4
- +
2 2
1 1 5+6 1
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE settings
on the control panel (top panel) to the following positions:
– Set CH 1-4 to "1-4".
– Set SUB CH to "5+6".
 1-channel input
With "Speaker Connection" (page 14)  or .
INPUT MODE
CH 1-4 SUB CH
+ +
1-4 1 3/2 4 5 3+4
- +
1 1 2 5+6 1 2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE settings
on the control panel (top panel) to the following positions:
– Set CH 1-4 to "1".
– Set SUB CH to "1+2".
REAR
SUB
* AUDIO *
OUT
OUT
AUDIO OUT
*
 2-channel input
With "Speaker Connection" (page 14)  or .
INPUT MODE
CH 1-4 SUB CH
+ +
1-4 1 3/2 4 5 3+4
- +
1 1 2 5+6 1 2
* Use a speaker wire-to-RCA adaptor (not supplied) for high-
level input connection.
Note
When making this connection, set the INPUT MODE settings
on the control panel (top panel) to the following positions:
– Set CH 1-4 to "1-2".
– Set SUB CH to "1+2".
 4-channel input
With "Speaker Connection" (page 14)  or .
AUDIO OUT*
INPUT MODE
CH 1-4 SUB CH
+ +
1-4 1 3/2 4 5 3+4
- +
1 1 2 5+6 1 2
*1 Filtered signal. Tweeter output or HPF output from the
car audio.
*2 Filtered signal. Woofer output or LPF output from the car
audio.
*3 Use a speaker wire-to-RCA adaptor (not supplied) for
high-level input connection.
Note
When making this connection, set the INPUT MODE settings
on the control panel (top panel) to the following positions:
– Set CH 1-4 to "1+3/2+4".
– Set SUB CH to "3+4".
AUDIO OUT
*
1 AUDIO OUT*
* *
3 3
2
13
GB