Denon DJ Prime GO Guide D'utilisation Rapide page 6

Masquer les pouces Voir aussi pour Prime GO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

22. Sync: Press this button to activate sync.
When Key Lock is activated, the track's key
will remain the same even if you adjust its
speed.
Press and hold Shift and press this button
to reset Key Lock.
Key Sync: When a track is playing back,
press and hold this button to activate key
sync to that track.
23. Pitch Fader: Move this fader to adjust the
speed (pitch) of the track.
Press and hold Shift and then press one of
the Pitch Bend buttons to adjust the total
range.
24. Pitch Bend –/+: Press and hold one of
these buttons to momentarily reduce or
increase (respectively) the speed of the
track.
Range: Press and hold Shift and then press
one of these buttons to set the range of the
pitch fader.
25. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the wheel is
touched and moved.
26. Vinyl: Press this button to activate/deactivate a "vinyl mode" for the platter. When activated,
you can use the platter to "scratch" the track as you would with a vinyl record. When
deactivated (or if you are touching only the side of the platter), move the platter to temporarily
adjust the track's speed.
Press and hold Vinyl to enter/exit Grid Edit mode.
27. Cue: During playback, press this button to return the track to the initial cue point and stop
playback. To move the initial cue point, make sure the track is paused, move the platter to
place the audio playhead at the desired location, and then press this button. If the deck is
paused, press and hold this button to temporarily play the track from the initial cue point.
Release the button to return the track to the initial cue point and pause it. To continue playback
without returning to the initial cue point, press and hold this button and then press and hold the
Play button, and then release both buttons.
During playback, press and hold Shift and then press this button to set the initial cue point.
28. Play/Pause: This button pauses or resumes playback.
Press and hold Shift and then press this button to "stutter-play" the track from the initial cue
point.
6
25
26
27
28
22
23
24

Publicité

Table des Matières
loading

Table des Matières