Siemens TI955 Mode D'emploi page 59

Machine à expresso automatique
Masquer les pouces Voir aussi pour TI955:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off. ~ "Menu
settings" on page 63
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
Press the " button.
1.
Use the rotary selector to set the
2.
coffee strength or select ground
coffee.
Press the " button or the rotary
3.
selector to confirm.
Aroma setting
The longer coffee is brewed, the more
bitter substances and undesirable
aromas are released. This has a
negative effect on the taste and makes
the coffee less easily digestible. The
appliance therefore offers special
aroma settings for extra strong coffee:
doubleShot and TripleShot. Depending
on the setting, once half or a third of the
volume has been prepared, a second
portion of coffee beans is ground and
brewed, so that in each case only the
pleasant and beneficial flavours and
aromas are released.
Operating the appliance en
Notes
The doubleShot setting can be
selected for all coffee drinks except
for:
drinks with a small volume of
coffee, e.g. Ristretto
coffee drinks with milk and a
small volume of coffee
a small volume of coffee, e.g.
setting 200 ml "Caffe Latte" with
a 90% share of milk (10% share
of coffee)
preparation with ground coffee
dispensing two cups
The aroma setting TripleShot can
only be selected for Coffee XL.
Dispensing two cups is not
possible
Adjusting the milk/coffee mixing ratio
A coffee drink with milk is selected.
Press the milk button.
1.
2.
Use the rotary selector to set the
share of milk in %.
Example: When a value of 30% is
configured, 30% milk and 70%
coffee will be dispensed.
Press the milk button or the rotary
3.
selector to confirm.
Selecting cup size
A drink is selected.
Press the ml button. The preset
1.
volume depends on the type of
beverage.
Use the rotary selector to adjust the
2.
desired volume in ml increments.
Press the ml button or the rotary
3.
selector to confirm.
Notes
The volume cannot be changed for
ristretto.
The volume dispensed can fluctuate
depending on the quality of the milk.
59

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ti957Ti955 connect sérieTi957 connect sérieEq.9 plus connect s500Ti9555x1deTi955 série ... Afficher tout

Table des Matières