AVer Vision M90UHD Mode D'emploi page 125

On the other side, locate the VGA/HDMI output port of the computer or laptop and connect it
to VGA/HDMI in port of AVerVision M90UHD. The video signal from the VGA/HDMI IN port
is streamed to VGA/HDMI OUT.
[Note]
- To display computer image, press Camera/PC button on the control panel or remote
control to switch AVerVision M90UHD to computer mode.
- For laptop to output display image, use the keyboard command (FN+F5) to switch
between the display modes. For different command, please refer to your laptop manual.
13