Parkside HG04678 Instructions D'utilisation Et Consignes De Sécurité page 28

Remark: If you want to quit setting up the manually watering
mode, you can press the
programming and go back to the normal operation mode.
Remark: If the valve has been opened manually and a pro-
grammed start of a watering period overlaps the manual opening
period, the programmed starting time is suppressed.
Example:
The valve is opened at 9:00 am manually, the opening
period is 30 minutes. A program with a start time be-
tween 9:00 am and 9:30 am will not be undertaken
in this case.
Read / modify watering programmes
1. In the normal operation mode use the rotary control
switch between Programme 1‒6 to read the data.
2. To modify the program data, press the SET button
approx. 2 seconds after selecting the program in step 1.
After modifying the program data, the system will go back
to the normal operation mode.
3. To activate / deactivate the program, press the SET button
once after selecting the program in step 1.
28 GB/IE/NI
(ON / OFF) button to exit the
7
to
5
for
4
4