Parkside HG04678 Instructions D'utilisation Et Consignes De Sécurité page 25

The minute display on the "Start" section will flash on
screen (see Fig. 7).
4. Set the minutes for starting the watering time with the
rotary control
SET button
The hour display on the "Run Time" section will flash
on screen (see Fig. 8).
5. Set the hour for the watering time and confirm with the
SET button
The minute display on the "Run Time" section will
flash on screen (see Fig. 9).
6. Set the minutes for the watering time and confirm with
the SET button
The cursor of the "watering frequency" section will
flash on screen (see Fig. 10).
The watering frequency can be selected by:
The watering cycle (right hand column of the display),
see step 7.
or
The watering days (left hand column of the display),
see step 8.
(e. g. 20 minutes) and confirm with the
5
.
4
.
4
.
4
GB/IE/NI 25