Parkside HG04678 Instructions D'utilisation Et Consignes De Sécurité page 27

Remark: In case you input a wrong data, you can always
press the (ON/OFF) button
Manual operation for watering
The valve can be opened or closed manually at any
time. A program-controlled open valve can be closed early
without changing the program data (watering start time, run
time and frequency).
1. Press the
valve manually (or just press the
opened valve).
2. Press the SET button
tion.
The hour display on the "Run Time" section will flash
on screen.
3. Set the hour of the watering time and confirm with the
SET button
The minute display on the "Run Time" section will
flash on screen.
4. Set the minute of the watering time and confirm with the
SET button
button for approx. 2 seconds to open the
6
if you want to set a specific dura-
4
.
4
.
4
to go to previous step.
7
button to close an
6
GB/IE/NI 27