Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Fault
The appliance is not
working.
The battery status dis-
play does not show any
status.
The red fault indicator
lights up for 10 seconds.
No charging function.
The dust container can-
not be inserted.
Suction is reduced.
Disposing of old appliance
Dispose of the appliance in an environ-
▶
mentally friendly manner.
Cause and troubleshooting
The battery has not been inserted correctly.
Insert the battery correctly. Inserting and charging the
▶
battery
The battery has not been charged.
Charge the battery.
▶
The battery has overheated or overcooled.
Switch off the appliance and disconnect the appliance
1.
from the power supply.
Wait until battery has reached room temperature.
2.
The appliance has overheated or overcooled.
Switch off the appliance and disconnect the appliance
1.
from the power supply.
Wait until the appliance has reached room temperature.
2.
Incorrect charger was used.
Only use the charger that is included.
▶
The filter unit is not complete.
Check whether the filter unit is complete.
▶
The filter unit or dust container is not positioned correctly.
Check whether the filter unit and dust container are inser-
▶
ted correctly.
The filter is blocked.
Switch off the appliance and disconnect the appliance
1.
from the power supply.
Clean the filter unit.
2.
The nozzle is blocked.
Switch off the appliance and disconnect the appliance
1.
from the power supply.
Check whether the air channel from the nozzle to the ap-
2.
pliance is blocked.
Empty the dust container.
3.
Clean the filter unit.
4.
Once the appliance has cooled down, switch the appli-
5.
ance back on.
Information about current disposal meth-
ods are available from your specialist
dealer or local authority.
Troubleshooting en
19
Publicité
