Using The Pa-Vr10E Pc For The First Time - Sharp PA-VR10E PC Mode D'emploi

Screen displays and examples
• The screens actually displayed on the recorder may differ from
the example screens shown in this manual.
Using the PA-VR10E
Before you attempt to use the recorder, insert the batteries and
reset (initialise) the recorder to initialise its status.
Inserting the batteries and resetting (initialising)
the recorder
Remove the battery cover as shown in the diagram below.
1
Insert the batteries provided with the recorder.
2
Ensure that the batteries are inserted with the correct polarity.
Fit the battery cover back in its original position, by aligning
3
with the indent on the side of the recorder.
Using a ballpoint pen or similar tool, press the reset button
4
on the back of the recorder.
A reset confirmation message ("RESET?") appears on the
display.
• Do not use objects with extremely sharp or flexible points to
press the Reset button.
E-6
for the first time
PC
Indent