Sharp PA-VR10E PC Mode D'emploi page 28

G PC used for data playback
The requirements listed below in addition to those above
CPU:
Hard disk drive: Minimum 5 MB of space available
RAM:
Other:
Note:
If your PC is running Windows 98 or 98 Second Edition, you will
need to install a dedicated USB driver. Install the dedicated USB
driver from the bundled CD-ROM.
• Microsoft, Windows and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the U.S.
and/or other countries.
Intel and Pentium are registered trademarks of Intel Corporation
in the U.S.
Other company names and product names appearing in this
operation manual are either registered trademarks or trademarks
of those companies.
Connecting the digital voice recorder to a personal computer
To connect to a PC, use the bundled PC-Link cable (USB (A) male-
USB (mini-B) male).
• Do only connect USB cable less than 1.2 m to the digital voice
recorder.
Plug the smaller connector of the PC-Link cable into the USB
1
jack of the digital voice recorder.
Be sure the
E-26
Intel Pentium II 300 MHz or higher
Additional disk space is required to store
unconverted audio files and to create the
converted (WAV-format) files.
Minimum 128 MB
Audio playback devices (sound card, speakers,
etc.), CD-ROM drive, Mouse, Microsoft
Windows Media
software.
mark on the connector is facing downward.
®
Player or other WAV playing
®