Sharp PA-VR10E PC Mode D'emploi page 32

• Do not copy files other than audio files recorded using the
recorder to the folders inside the SACM folder. Doing so could
cause the recorder to malfunction.
• If you try to play a file in an incompatible format to the recorder,
" ? ? ?" appears on the display and the file does not play.
• Always copy audio recordings from the recorder to your PC, or
from your PC to the recorder, an entire folder at a time. Attempting
to copy individual files could result in the accidental deletion of
important files from the recorder or cause it to malfunction.
• Do not change the names, attributes or extensions of audio files.
Doing so could cause the recorder to malfunction.
• Do not unplug the PC-Link cable while data transfer is in progress.
Doing so could result in data corruption or cause the recorder to
malfunction.
• Do not connect the digital voice recorder to your PC during
recording or playback.
• Do not copy so many audio files to the recorder that its storage
capacity is used up. Doing so may result in a very short available
recording time or recording may not be possible at all.
• Audio files are recorded in proprietary format. To play the audio
files on your PC using applications such as Windows Media
Player, convert the files to WAV format using the data conversion
tool.
• Do not connect the recorder to your PC when the batteries are
dead or if there are no batteries in the recorder. Doing so could
cause the recorder to malfunction or could result in the recorder
not being recognized as an external drive by the PC.
Disconnecting the digital voice recorder
• After confirming that data transfer is complete and performing the
procedure for removing hardware from the personal computer,
unplug the PC-Link cable from the digital voice recorder.
• The recorder remains in "LINK..." status until it is disconnected
from the PC.
E-30