Using The Recorder Connected To A Pc - Sharp PA-VR10E PC Mode D'emploi

Press the
3
(1 to 99 minutes), then press the OK button.
The timer starts running.
• To stop the timer while it is running, press the STOP/MENU
button.
Hold function
Setting the HOLD switch to the locked
recorder in its current status and disables the other buttons. Use
this feature to prevent the recorder's buttons from being pressed by
mistake. To unlock the recorder status, set the HOLD switch to the
unlocked position.

Using the recorder connected to a PC

• You can store material captured using the digital voice recorder
on a personal computer in the form of data files. It is also
possible to transfer such data files from the personal computer
back to the digital voice recorder at a later date.
• You can play back recorded audio file on your PC by using the
data conversion tool to convert the audio files to PC-compatible
WAV-format files.
* To play back audio files recorded on the digital voice recorder
on a PC, you need to use the data conversion tool. Install the
software from the bundled CD-ROM.
Your personal computer must meet the system requirements listed
below in order to connect the digital voice recorder and use
recorded material.
G PC used for data storage only
Supported models: IBM PC or 100% compatible
Supported Operating Systems:
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
USB port: 1 port is required to connect the recorder (ver. 1.1/ 2.0)
L M
(+) or (-) cursor button to select a timer delay
®
Windows
®
Windows
®
Windows
®
Windows
®
Windows
®
XP Home Edition
®
XP Professional
®
2000 Professional
®
Millennium Edition
®
98/98 Second Edition
position locks the
E-25