asalvo ANDADOR Manuel D'instructions page 11

3) ASSEMBLY OF FABRIC SEAT:
Firstly, insert those 5 pins in the front of seat into the holes on the upper
tray referring to Fig 9. Then put those belts with buckle at the back of seat
through the holes on the upper tray according to Fig 10, the belt is fixed firmly
as Fig 10 shown. The fabric seat is fixed completely as shown on Fig11.
4) ASSEMBLY OF TOY TRAY:
A) Assembly of battery:
1) Use a screwdriver to unscrew the battery cover(See Fig 12).
2) Insert two 1.5V batteries inside, ensure correct polarity(see Fig13).
3) Screw battery cover back on.
Unscrew(screw)
battery cover
Screw
B) Assembly of toy tray:
1)As the arrow shown on Fig 14, fix the toy tray onto the upper tray, and then
press down the front toy tray to fix it, the toy tray is fixed firmly when you hear
a CLICK ( see Fig 15).
2)Press down the two snap-fit components according to the arrow shown on
Fig 16, the toy tray can be detached easily.
14
9
12
battery cover
Battery cover
10
1.5V batteries
13
Toy Tray
15
11
EN
toy tray
16