Black & Decker Dustbuster Mode D'emploi page 5

• Tap the fi lter vigorously to remove loose dust
from the fi lter.
• If necessary, wash the fi lter in warm, soapy
water.
• Make sure that the fi lters are dry.
• Refi t the fi ne particulate fi lter (17) on to the ap-
pliance.
• Refi t the pre-fi lter (16) as described above.
Replacing the fi lters
The fi lters should be replaced every 6 to 9 months
and whenever worn or damaged. Replacement fi l-
ters are available from your Black & Decker dealer
(cat. no. PD10):
• Remove the old fi lters as described above.
• Fit the new fi lters as described above.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Reuse of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once they
have reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest au-
thorised repair agent by contacting your local
Black & Decker office at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
Voltage
Weight
EC declaration of conformity
PAD1200 - H1
Black & Decker declares that these products con-
form to: 2006/95/EC, EN 60335, Level of sound
pressure, measured according to EN 60704-
1: = 66 dB(A)
The undersigned is responsible for compilation of
the technical fi le and makes this declaration on
behalf of Black & Decker
Spennymoor, County Durham,
Guarantee
Black & Decker is confi dent of the quality of its
products and offers an outstanding guarantee. This
guarantee statement is in addition to and in no way
prejudices your statutory rights. The guarantee is
valid within the territories of the Member States of
the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due
to faulty materials, workmanship or lack of conform-
ity, within 24 months from the date of purchase,
Black & Decker guarantees to replace defective
parts, repair products subjected to fair wear and
tear or replace such products to make sure of the
minimum inconvenience to the customer unless:
• The product has been used for trade, profes-
sional or hire purposes.
• The product has been subjected to misuse or
neglect.
• The product has sustained damage through
foreign objects, substances or accidents.
• Repairs have been attempted by persons other
than authorised repair agents or Black & Decker
service staff.
To claim on the guarantee, you will need to submit
proof of purchase to the seller or an authorised
repair agent. You can check the location of your
nearest authorised repair agent by contacting your
local Black & Decker offi ce at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
ENGLISH
PAD1200
Vdc 12
kg 1.6
Kevin Hewitt
Director of Consumer
Engineering
DL16 6JG, United Kingdom
23-03-2009
5