Usb Driver Installation; Vista, Win 7, Win; Usb Driver Installation For Windows 98, Me - Valeo SPHEROS THERMO TEST Mode D'emploi

SPHEROS Thermo Test
14

USB driver installation

You can also use several diagnostic adapters simultaneously.
For that, either you run multiple instances of the PC software, or select
the respective diagnostic adapter manually in your PC application.
Please note for older operating systems (Windows 98, 2000, ME, XP):
For each "SPHEROS Diagnostic Adapter" its own USB driver must be
installed separately. Consider this if using several diagnostic adapters
on the same PC.

14.1. Vista, Win 7, Win 8

If you use Vista, WIN7 or a higher operating system, the device driver
must not installed manually. If you have installed the software as
described in chapter 13, the SPHEROS Thermo Test is ready for use.

14.2. USB driver installation for Windows 98, ME

a) Exit all running programs and applications (virus scanners
included).
b) Connect the "SPHEROS Diagnostic Adapter" to a spare USB Port
of your computer.
c) The automatic hardware detection starts the Add New Hardware
Wizard to install the USB driver. When the "SPHEROS Diagnostic
Adapter" was found, confirm that by clicking the NEXT button.
USB driver installation
57