Advanced Function Programming; Register Number And Consecutive Number Programming - Sharp XE-A203 Manuel D'instructions

ADVANCED FUNCTION PROGRAMMING

Register Number and Consecutive Number Programming

1
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 6 digits) that is one less than the desired starting
number.
Register number
s 1
Key operation example
123456
Consecutive number
s 2
Key operation example
58
To set the register number 0
@
Register number (one to six digits)
s @
1
s A
To begin the count from 000001
@
A number (one to six digits) that is one
less than the desired starting number
s @
2
s A
1000
s A
Print
Register number
s
Print
Consecutive
number
A