Publicité
Les langues disponibles
Les langues disponibles
____________________________________________________________________________________Wiedenmann GmbH
2.1. Installing the weight transfer
5. Connect the hydraulic line (H1)
to the tractor pressure line.
6. Connect the hydraulic line (H2)
to a depressurised tractor
return line.
CAUTION !
Before lifting the installed
machine, the lifting piston of
the hydraulic cylinder must be
fully retracted.
Nonobservance results in a
greater risk of the parts
becoming warped and consequently
damaged.
2.2. Setting the weight transfer
The setting must take place
on the lawn to be worked on.
1. Fully lower the accessory
equipment.
2. Set the tools to the
required working depth by
pressing on hydraulic
control block on the
tractor.
3. Set the hydraulic control
block to the 0 position.
Do NOT switch to the
floating position.
8
CAUTION:
The setting is based on the
respective tractor model. The
setting must be reset if the
tractor is changed.
If the desired working depth
is not reached then the
setting must be carried out
again.
Publicité
