Wiedenmann 103 85 65 - 00 Notice De Montage page 27

____________________________________________________________________________________Wiedenmann GmbH
7.1. Installing the weight transfer
1. Screw on the bottom cylinder
holder (A) to the universal
frame.
2. Insert and secure the top
cylinder holder (B) with two
upper guide bar pins (C) in the
slot in the universal frame.
3. Insert and lock the bottom
connecting rod of the tractor in
the applicable hole with the
lower connecting rod pin (D).
4. The fishplate (E) must be
fastened for the tractor with
the three hexagonal bolts (F) in
the hole pattern of the top
cylinder holder (B.
27