Publicité
Les langues disponibles
Les langues disponibles
____________________________________________________________________________________Wiedenmann GmbH
7.1. Gewichtstransfer anbauen
5. Connect the hydraulic line (H1)
to the pressure line of the
tractor.
6. Connect the hydraulic line (H2)
to a depressurized return line
on the tractor.
CAUTION !
Before lifting the installed
machine, the lift cylinder of
the hydraulic cylinder must be
fully retracted
Nonobservance results in a
greater risk of the parts
becoming warped and consequently
damaged.
7.2. Setting the weight transfer
The setting must take place
on the lawn to be worked on.
1. Fully lower the accessory
equipment.
2. Actuate the hydraulic
control block on the
tractor to lower the tines
to the required working
depth.
3. Move the hydraulic control
block to 0-position!!!
Do NOT switch in floating
position.
28
CAUTION:
The setting is based on the
respective tractor model. The
setting must be reset if the
tractor is changed.
If the desired working depth
is not reached then setting
must be carried out again.
Publicité
