Publicité
Les langues disponibles
Les langues disponibles
Detailed illustration for screw and nut assembly:
2. The whole assembly
Remove the locking knob from the pipe beneath the U-holder, insert the pipe into the top of the height
adjustable pipe and align the holes on the pipes, insert the locking knob through the holes and tighten the
locking knob.
OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Switch on the fan by using the speed switch. "0" = off, "I" = low speed, "II" = medium speed, "III" = high
speed.
3.
Tilting angles: By pushing the fan-guard, you can adjust the fan to the preferred elevation.
CLEANING
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
- 5 -
Publicité
