AEG FSE63757P Notice D'utilisation page 23

Problem and alarm code
Rattling or knocking sounds
from the inside of the appli-
ance.
The appliance trips the cir-
cuit-beaker.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
11.1 The product number
code (PNC)
If you contact an Authorised Service
Centre, you need to provide the product
number code of your appliance.
The PNC can be found on the rating
plate on the appliance door. You can
also check the PNC on the control panel.
11.2 The washing and drying results are not satisfactory
Problem
Poor washing results.
Possible cause and solution
• The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.
• The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
• Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
Before checking the PNC, make sure the
appliance is in the programme selection.
1. Press and hold simultaneously
The display shows the PNC of your
appliance.
2. To exit the PNC presentation, press
and hold simultaneously
for about 3 seconds.
The appliance returns to the programme
selection.
Possible cause and solution
• Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
• Use more intensive washing programme.
• Activate the ExtraPower option to improve the wash-
ing results of a selected programme.
• Clean spray arm jets and filter. Refer to "Care and
Cleaning".
ENGLISH
for about 3 seconds.
23
and
and