Télécharger Imprimer la page

AudioSonic CL-1486 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Sleep function
When the radio is turned on, press the SNOOZE / SLEEP button (10) to turn on
the sleep mode. The sleep time will keep fl ashing for 5 seconds, during that time
press the SNOOZE / SLEEP button (10) again to change the duration from 90 to
15 minutes. Press the ON/OFF button (12) to cancel the sleep function.
Display light dimmer
When the radio is turned off, set the DISPLAY LIGHT DIMMER LOW / HIGH /
AUTO OFF (25) to the AUTO OFF mode, the LCD display will automatically turn
off in 15 seconds.
-
Press any key button to turn the display on.
DST – Daylight Saving Time (summer- and wintertime)
Press the >> / DST button (6) and hold it for 3 seconds to toggle between the
summer- en wintertime.
Radio operation
-
Press the ON / OFF button (12) to turn the radio on.
-
Press the AM/FM BAND button (8) to choose the desired waveband.
-
Select the station by using the TUNING knob (17).
-
Turn the VOLUME knob (24) to adjust volume as required.
-
Press the ON / OFF button (12) again to turn the radio off.
Notes:
-
The AM band uses an internal directional aerial, rotate the radio for best
reception.
-
Ensure that the FM ANTENNA (22) is completely unrolled and extended for
best FM reception.
Line in jack
The LINE IN JACK (18) can be used to playback alternate audio signal sources
on the unit speakers. This LINE IN JACK (18) requires a 3.5mm audio cable for
an input signal (3.5mm audio cable is not included).
Specifications
Frequency :
AM 540 – 1600 kHz
FM 88 – 108 MHz
Battery backup : 1 x 3V CR2032 (fl at) lithium battery (not included)
Power source : AC230V ~ 50Hz, 5W
All manuals and user guides at all-guides.com
GB-4

Publicité

loading