AudioSonic CL-1486 Mode D'emploi page 3

Power connection
Plug the AC POWER CORD (23) to a household outlet AC source. This unit is
equipped with a battery backup system, it requires a 3V CR2032 (fl at) lithium
battery (not included). Insert the battery in the BATTERY COMPARTMENT (14),
making certain that the positive and negative (+ and -) battery terminals are
attached to the corresponding terminals on the plate in the battery compartment.
If an AC power failure occurs, the clock automatically switches to the battery
power supply, the clock and timer memory continue running. When the AC power
resumes, the clock switches back to AC again.
Time, calendar and alarm settings
A. Setting time and calendar
Press MODE button (11) in normal mode and keep depress over 2 seconds
to enter time set mode, after enter the setting mode, press MODE button (11)
to change the mode cycle as follows:
Normal mode → Year → Month → Day → 12/24 H → RTC Hour → RTC Min →
Normal mode
Action (during data adjustment):
- Press << / MONTH-DAY / °C/°F button (2) to adjust data backward.
- Press >> / YEAR / DST button (6) to adjust data forward.
- Keep depress << / MONTH-DAY / °C/°F button (2) or >> / YEAR / DST button
(6) button for 2 seconds to enable auto backward/forward.
B. Setting alarm 1 and alarm 2
Press ALARM SET button (9) during normal mode and keep depress over 2
seconds to enter the alarm set mode, after entering the setting mode, press
the ALARM SET button (9) to change the mode cycle as follows:
Normal mode → AL.1 Hour → AL.1 Min → AL.1 Weekday Alarm → AL.2 Hour
→ AL.2 Min → AL.2 Weekday alarm → Normal mode
Select alarm weekday mode as follows
1-5 Monday to Friday
1-7 Whole week
6-7 Saturday and Sunday
1-1 One day of the week
All manuals and user guides at all-guides.com
GB-2