Miele PWM 912 Mode D'emploi page 51

Programme summary – basic programmes
The wash time is the minimum main wash time after the set temperature is reached. The
times for water intake, dispensing, heating, intermediate spinning, etc. are not included.
Whites programmes
Whites
Fabric
Programme se-
quence
Extras
* The standard programmes Whites and Coloured items are programmed with hot water rinse cycles. If hot water is
available, we recommend using hot water for the final rinse:
– There is less residual moisture in the laundry after spinning.
– The laundry is already warmed.
– This saves time and energy if the laundry is immediately either dried in a tumble dryer or ironed with an ironer.
90 °C (70 °C to 90 °C)
Cotton, linen and mixed fibre fabrics, for example
bed linen and towelling
Main wash up to 90 °C, wash time 11 min
Cool down can be activated in the Benchmark
tool
2 rinse cycles
Last rinse cycle hot*
Final spin
Pre-wash, Soak, Water plus, Intensive, Rinse
plus, Add agent, Rinse hold
en - Programme summary
Load ratio/Load
size
PWM 912 – 12 kg
PWM 916 – 16 kg
PWM 920 – 20 kg
1:9
51