Integrity Of Welding Reports In Memory; Service And Repair; General; Transport, Storage, Shipment - TEGA 4000-S Manuel Utilisateur

Version December 2013

2.10 Integrity of Welding Reports in Memory

When transferring welding reports to a USB stick, always be sure to wait
until the display shows the "Download finished" message before you discon-
nect the USB stick from the product. If you disconnect it too early, the unit
may ask you whether you want to delete the reports in memory, although
they were not properly transferred. In this case, if you delete the contents
of the report memory, the welding reports would be irrevocably lost and
would not be available elsewhere either.
3

Service and Repair

3.1

General

As the product is used in applications that are sensitive to safety consid-
erations, it may be serviced and repaired only by the manufacturer or its
duly authorized and trained partners. Thus, constantly high standards of
operation quality and safety are maintained.
Failure to comply with this provision will dispense the manufacturer from
any warranty and liability claims for the product, including any consequen-
tial damage.
When serviced, the unit is upgraded automatically to the technical specifi-
cations of the product at the moment it is serviced, and we grant a three-
month functional warranty on the serviced unit.
We recommend having the product ser viced at least ever y twelve
months.
3.2

Transport, Storage, Shipment

The product ships in its case in a cardboard box. Its case protects the prod-
uct from humidity and environmental agents. Whenever it is not used and
to forward it, keep the case of the product closed.
4

Principles of Operation

The TEGA 4000–S allows welding electrofusion fittings that feature a bar
code. Every fitting is provided with a tag with one or two bar codes on it.
The structure of this code is internationally standardized. The first code,
encoding the data on proper welding, complies with ISO TR 13950, the
second code, if present, encoding the component traceability data, com-
plies with ISO 12176-4.
The welding control program supports certain of the extended traceability
data encoded under the ISO 12176-4 standard, e.g., the fitting traceability
code. To use this feature, the desired data have to be enabled in the con-
figuration menu, at "Recording" (see Sect. 10.1).
The welding parameters can also be entered manually. The microprocessor-
controlled TEGA 4000–S Welding Unit
• controls and monitors the welding process in a fully automated fash-
ion,
• determines welding duration depending on ambient temperature,
• shows all information on the display in plain text.
All data that are relevant for the weld or for traceability are saved to the
internal memory and can be sent to a USB stick.
T E G A M u h e n d i s l i k S a n a y i v e T i c a r e t A . Ş .
06930 Sincan Ankara, Turkey
All manuals and user guides at all-guides.com
English
4000-S
7