Downloading All Reports; Downloading By Commission Number, Date Or Report Range; Understanding The Report Download Process; Deleting Data From Memory - TEGA 4000-S Manuel Utilisateur

Version December 2013
The Service Report option is not important for normal operation. This
report lists the events related to the service and maintenance of the weld-
ing unit.
8.2

Downloading All Reports

After the file type was selected, the next screen offers a "Print All Reports"
option. Selecting it will download all welding reports currently in system
memory in the previously selected file format.
8.3

Downloading by Commission Number, Date or Report Range

After the file type was selected, the next screen offers a "By Commission
Number," a "By Date Range," and a "By Report Range" options. Depending
on the selection, the ñ and ò arrow keys can be used to select from the
commissions currently in system memory the desired one, of which the
reports should be downloaded, or the alphanumeric keypad can be used
(see Info in Sect. 5.2) to enter a start date and an end date, or the first and
the last report, that define a range of dates or a range of reports of which
the reports should be downloaded. When you press the START/SET key, you
cause the selected reports to be transferred to the storage media.
8.4

Understanding the Report Download Process

The download starts automatically after a selection was made among the
options. Wait for all the selected reports to transfer and the "Download
completed" message to appear on the screen.
If a problem occurs while the download is in progress, a "Printer not ready"
message shows. After the problem condition is cleared, the download re-
sumes automatically.
If the welding unit recognizes a problem that cannot be cleared
while the data transfer is in progress, it does not resume the
process and displays a "Download cancelled" error message. To
Info acknowledge this error, press the START/SET key.
8.5

Deleting Data from Memory

The report data in memory can be deleted only after all welding reports
were transferred, which is indicated by the "Download completed" message.
When the storage media is unplugged, a "Delete Memory" message ap-
pears. If the START/SET key is pressed at this point, a further confirmation
message "Delete Memory, sure?" is shown, which has to be confirmed by
pressing the START/SET key once again. Then, the report data in memory
are deleted.
8.6

Keeping Data in Memory

When the cable or storage media is unplugged, a "Delete Memory" message
is displayed. Press the STOP/RESET key to keep the current report data in
memory. They can then be printed off once again.
Make a habit of handling the internal storage as described in
Sect. 2.10, to maintain data integrity and avoid any inadvertent
deletion of the reports in memory.
Important
9

Dedicated Welding Unit Information

9.1

Displaying Next Service and Other Characteristics of the Welding Unit

The key technical information on the welding unit itself is displayed by hold-
T E G A M u h e n d i s l i k S a n a y i v e T i c a r e t A . Ş .
06930 Sincan Ankara, Turkey
All manuals and user guides at all-guides.com
English
4000-S
13