Recycling The Product At The End Of Its Service Life; Warning - EMGA 408.100 Mode D'emploi

RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE

This appliance has the recycling symbol marking relating to waste electrical and electronic
equipment. This means that this product must be processed by a waste sorting system in
accordance with Directive 2002/96/CE (WEEE) – Professional Equipment section – so
that it can be either recycled or disassembled in order to reduce any impact on the
environment.
For further information, please contact your dealer or SANTOS.
For the elimination or recycling of the appliance components, please contact a specialist
company or contact SANTOS
Electronic products which have not been out-sorted are potentially dangerous for the
environment.
The packaging materials must be eliminated or recycled in accordance with regulations in
force.

WARNING:

1. The appliance No. 48-49 is not designed to be used with knives of a cut of
!
10 mm or more
2. The appliance must not be cleaned with either with a water spray or a
pressure jet, nor should it be immersed
Note: To make understanding the following paragraphs easier, please refer to the
diagrams at the end of this manual
98148 US 3.2 - 12 2010
408100-200 en ma 2010.12
5 / 14 www.santos.fr
5/14