Yamaha YSP-1100 Mode D'emploi page 76

ADJUSTING THE AUDIO BALANCE
Note
SWFR is only available when a subwoofer is connected to this
unit and SWFR is selected for BASS OUT in SOUND MENU
(see page 66).
3
Press / to adjust channel volumes.
Control range: –10 dB to +10 dB
4
Wait for a few seconds without operating this
unit when you have completed your
adjustment.
Notes
• All the channel levels cannot be adjusted when the stereo
playback is selected as the beam mode (see page 47).
• FRONT L/R cannot be adjusted when the stereo plus 3 is
selected as the beam mode (see page 41).
• Only CENTER can be adjusted when the my beam is selected
as the beam mode (see page 48).
• FRONT L/R are automatically adjusted depending on the
settings of the other channels when the stereo plus 3 beam or
stereo playback is selected as the beam mode (see pages 43 and
47).
y
If the level of a particular channel cannot be adjusted, – –dB
appears in the front panel display.
74
En
ENTER