Fm Operation; M-Port - Revo Uno2 Mode D'emploi

FM Mode

FM Operation

Extend the telescopic antenna found on the
rear of Uno.
Enter 'FM Mode' from the Main Menu or by
pressing the MODE key until 'FM Mode' is
displayed on Uno's LCD display.
If this is the first time Uno has been in FM
mode, it will start at the beginning of the FM
frequency range. Otherwise, the last FM
station you were listening to will be selected.
To scan through the FM frequency range
press the and buttons.
To 'SEEK' the next active station, press the
SELECT button.
Favourite Station Presets
Uno allows you to store 10 favourite station
presets, either via the 10 preset keys on
Uno itself, or on the Uno remote control.
To save the station you are currently
listening to as a preset, simply press the
PRESET button and use
unused location, then press SELECT to
store.
To listen to a stored station press the
PRESET button then use
your desired preset, the press SELECT
MPort Mode
Using MPort
Revo's MPort connector allows for quick
and easy connection of an iPod®, similar
MP3 player or sound source.
Using the connection lead supplied, Uno is
transformed into a high quality digital
audio speaker system.
Connect one end of the supplied audio
lead to the headphone (or auxiliary out)
socket of your source device, then
connect the other end to the MPort
on the side of Uno.
Uno's LCD screen will now display the
word 'MPort' on its screen.
You should adjust the output volume level
on both the source device and on Uno
itself to gain optimal volume levels and
sound performance.
and to find an
and to locate
MODE
FM
MODE
87.50MHz
90.45MHz
>Preset 1 unset
>Preset 2 unset
>Preset 1 set
>Preset 2 unset
MPort Mode
English
9