Assembly And Connection Notes - Siemens SIPROTEC 4 7XT71 Mode D'emploi

8

Assembly and Connection Notes

8.1 Unpacking of the Device
The device was packed in the factory according to the requirements of
IEC 60255–21.
Unpack the device with care and do not use force. Use an appropriate tool if nec-
essary. After unpacking, inspect the device visually for any mechanical defects.
NOTE
If the device has been damaged during transport, do not connect and operate it.
Observe any additional notes enclosed with the packaging.
Keep the transport packaging for future transport.
16
SIPROTEC 4, Injection Unit 7XT71, Product Information
C53000-B1175-C128-1, Edition 01.2014