Siemens SITRANS LPS200 Manuel D'instructions page 5

Specifications
Note:
Siemens Milltronics makes every attempt to ensure the accuracy of these
specifications but reserves the right to change them at any time.
SITRANS LPS200
Power
• jumper selectable
• 115 V AC, 50 to 60 Hz, 4 VA
• 230 V AC, 50 Hz, 6 VA
• 24 V DC, 2.5 W
All voltages ± 15 % (including ± 10 % according to IEC 61010-1)
Performance
Alarm delay
• 1 rpm model (storage applications)
• 5 rpm model (process applications)
Sensitivity
• adjustable spring tension position
• optional measuring vane available, depending on customer sensitivity
requirements
Approximate minimum material density
Standard measuring vane
• 100 g/l (6.25 lb/ft
• 200 g/l (12.5 lb/ft
Hinged measuring vane
• 35 g/l (2.19 lb/ft
• 70 g/l (4.69 lb/ft
Alarm Output
• microswitch SPDT contact 5 A at 250 V AC, non-inductive
microswitch SPDT contact 4 A at 30 V DC, non-inductive
Mechanical
Process Connections
• threaded connection
7ML19985FS61
3
) when vane is covered by 10 cm (4") of material
3
) when vane is covered by more than 10 cm (4") of material
3
) when vane is covered by 10 cm (4") of material
3
) when vane is covered by more than 10 cm (4") of material
SITRANS LPS200 – INSTRUCTION MANUAL
approx. 1.3 s
approx. 0.26 s
1¼" NPT, 1½" BSP
material: stainless steel 303 (1.4305)
Page EN-3