Rolsen RL-15X11 Manuel Du Propriétaire page 28

1 1
PC in socket (D-Sub jack)
1. Connect the signal cable from the monitor output sock-
et of the PERSONAL COMPUTER to the PC input
socket of the set.
2. Connect the audio cable from the PC to the PC
SOUND sockets of the set.
3. Press the INPUT SELECT button to select PC.
4. Switch on the PC, and the PC screen appears on the
set.
The set can be operated as the PC monitor.
Note : If you have an Apple macintosh, connect the VGA
desktop block (not supplied) from the 3 row 15 pin to 2 row
15 pin with the signal cable and connect the VGA desktop
block to the Macintosh.
Displayable Monitor Specification
Proposed
DOS
VESA(VGA)
VESA(VGA)
VESA(VGA)
VESA(SVGA)
VESA(SVGA)
VESA(SVGA)
VESA(SVGA)
VESA(XGA)
VESA(XGA)
VESA(XGA)
VESA(SXGA)
VESA(WXGA)
(Synchronization input form : separate)
28
Resolution H-freq(KHZ) V-freq(HZ) Pixel clock(MHZ)
720x400 37.9KHz 70Hz 35.50MHz
640x480 31.5KHz 60Hz 25.17MHz
640x480 37.9KHz 72Hz 31.50MHz
640x480 37.5KHz 75Hz 31.50MHz
800x600 35.1KHz 56Hz 36.00MHz
800x600 37.9KHz 60Hz 40.00MHz
800x600 48.1KHz 72Hz 50.00MHz
800x600 46.9KHz 75Hz 49.50MHz
1024x768 48.4KHz 60Hz 65.00MHz
1024x768 56.5KHz 70Hz 75.00MHz
1024x768 60.0KHz 75Hz 78.75MHz
1152x864 67.5KHz 75Hz 108.00MHz
1280x768 47.7KHz 60Hz 80.136MHz
Note :
a. If the set is cold, there may be a small "flicker" when
the set is switched on. This is normal, there is nothing
wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video
mode to obtain the best image quality for your LCD
monitor. If used under the other resolutions, some
scaled or processed pictures may appear on the
screen. In this case, set the PC vertical frequency to
60Hz. The set has been pre-adjusted to the mode
VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
d. Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
effects on the screen.
e. When the PC screen appears on the set, a message
may appear on the screen, and the message will differ
according to the Window system version (Win98,
2000). If a message appears click "Next" until the mes-
sage finishes.
f. If the message Out of Range
screen, adjust the PC as in the 'Displayable Monitor
Specification' section.
" appears on the