Ferroli EGEA 200 LT Manuel D'utilisation, Installation Et Entretien page 93

EGEA
200 LT - 260 LT - 200 LT-S - 260 LT-S
Positions allowed for transport and handling
ATTENTION! During the product handling and
installation phases the upper part must not be
stressed in any way, as it is not structural.
ATTENTION! Horizontal transport is allowed only
for the last km according to that indicated (see
"Positions not allowed for transport and han-
dling"), making sure supports are positioned in
such a way at the bottom of the boiler so as not
to stress the upper part, as it is not structural.
During horizontal transport the display must
face upwards.
fig. 1
cod. 3541T600 - Rev. 08 - 12/2021
Position allowed only for the last km
Positions not allowed for transport and handling
fig. 2
EN
93