Care And Cleaning Instructions - Nesco FS-250 Manuel D'instructions

CARE AND CLEANING INSTRUCTIONS

1. Always unplug the appliance from electrical outlet before cleaning.
2. Never immerse the base of this appliance in water or other liquid.
3. The blade, slicing guard and food carriage can all be removed and hand washed in warm
soapy water. Be careful when cleaning the blade, as it is extremely sharp. Do not leave
blade under water; trying to handle sharp objects in water can be hazardous.
4. Set thickness control to "P". This will keep the blade edge covered by support plate.
5. For ease of cleaning, the food carriage can be tilted up or completely removed.
6. Remove blade by holding the blade with one hand and using two fingers to pinch and turn
blade locking screw. Unlock blade by turning screw clockwise. Carefully remove blade
and hold by using the blade locking screw.
7. Clean outer surfaces with a damp cloth. Mild detergent or plain water can be used to
dampen cloth. Never immerse base in water or any other liquid. Do not use steel wool,
abrasive cleaners or sharp utensils to clean any part of this appliance.
8. After cleaning and drying, install blade to base in reverse order of Step 6. Carefully place
blade on mating hub of motor. Align the locking screw tabs with the mating slots in the
hub of motor and press in until seated. Rotate locking screw counter-clockwise until
seated to lock blade in place.
CARRIAGE TILT
CARRIAGE REMOVAL
BLADE REMOVAL
3