Features; Before First Use; Operation - Nesco FS-250 Manuel D'instructions

SUPPORT
PLATE
POWER
SWITCH
THICKNESS
CONTROL
1. Read and understand all instructions and components described in this manual. Keep for
future reference.
2. Remove all packaging and save for storage.
3. Remove and wash the Blade, Food Carriage and Slicing Guard in warm soapy water.
(follow Care and Cleaning Instructions).
4. Wipe the Base with a damp cloth. DO NOT IMMERSE THE BASE IN WATER OR ANY
OTHER LIQUID! (follow Care and Cleaning Instructions).
1. Place appliance on a flat, dry and stable surface.
2. Be sure power switch is 'OFF', then plug into a standard 120V AC electrical outlet.
3. Place a suitable tray or plate behind slicer to collect the sliced food.
4. Place food onto food carriage between support plate and slicing guard. To avoid danger of
injury, always use food carriage and slicing guard while cutting.
5. Adjust the slice thickness by turning the thickness control to desired thickness between 0
and 12 (Deli thin to 9/16").
6. Slide food carriage back so food is clear of blade. Press power switch to start the slicer.
Keep left hand clear, place near the power switch, and grasp the slicing guard with the
other hand.
7. To begin slicing, push food in towards support plate while holding the slicing guard and
slide food into blade. Slide food carriage back and repeat until you have sliced the desired
amount of food.
8. When finished, press power switch to turn OFF unit. Note: Blade will continue to move
for a short time. Always keep hands away from blade! Remove plug from electrical
outlet before cleaning.
9. For safety, always return thickness control to 'P' after use to shield sharp edge of blade
during storage.

FEATURES

BEFORE FIRST USE

OPERATION

2
BLADE
BLADE LOCKING
SCREW
SLICING GUARD
FOOD
CARRIAGE
CARRIAGE
ROD RELEASE
CARRIAGE
ROD
BASE