Nipponia VOLTY Manuel Du Propriétaire page 35

PERIODIC MAINTENANCE AND MINOR REPAIR
Front and rear brake pads
Each front brake pad is provided with wear indicators, which allows you to check the brake pad wear without having to
disassemble the brake. To check the brake pad wear, check the position of the wear indicators while applying the brake. If a
brake pad has worn to the point that a wear indicator almost touches the brake disc, have a dealer replace the brake pads as a set.
BRAKE FLUID
! WARNING
Insufficient brake fluid may allow air to enter the brake system, possibly causing it to become ineffective.
Before riding, check that the brake fluid is above the minimum level mark (1) and refill it if necessary.
Low position brake fluid level may indicate worn brake pads and/or brake system leakage. If the brake fluid level is low, be sure to
check the brake pads for wear and the brake system for leakage. When checking the fluid level, make sure that the top of the master
cylinder is level by turning the handlebars. Use only the recommended quality brake fluid, otherwise the rubber seals may deteriorate,
causing leakage and poor braking performance.
34
EN