Using The Appliance As A Reading Light; Midnight Light; Settings - Philips HF367X Serie Manuel

Using the appliance as a reading light

Midnight light

Settings

You can use the connected Sleep & Wake-Up Light as a reading light.
Press the reading light icon on the display to switch on the reading
light.
Note: You can increase and decrease the brightness intensity. You can
select a brightness between 1 (low) and 25 (high). The default
brightness setting is 18.
To switch off the light, press the cross icon in the menu.
Tip: When the light is on, you can also turn off the light with a single
tap on the top of the appliance. All active programs will stop. Set
alarms are still active.
If you wake up during the night, you can tap the top of the appliance
to activate a dim light. This dim, subtle orange light provides you with
just enough light to find your way in the dark. Switch off the Midnight
light by tapping the top of the appliance again.
Note: The Midnight light cannot be activated directly when the main
light is already on. In that case, first tap the top of the appliance to
deactivate the main light. Then tap again to activate the Midnight
light.
In this menu, you can adjust the clock time, the audio feedback, the
display brightness of the appliance and enable/disable Wi-Fi.
Note: Press and hold the settings icon for 8 seconds to open a new
menu, in which you can select DEMO mode (accelerated wake-up
curve) or VERSION (firmware version of the appliance).
If you have updated the appliance through connection to the app, the
information in this document may not be up to date. Find the latest
user manual on www.philips.com/support
Philips reserves the right to update the firmware of the appliance.
English
15