Powerbackup; Snoozing; Dismissing The Alarm - Philips HF367X Serie Manuel

English
14
Duration of the wake-up profile
Type of sound

PowerBackUp+

Snoozing

Dismissing the alarm

The default duration of the wake-up curve (brightness increase to the
set maximum light intensity) is 30 minutes. The duration can be
changed to your preference by pressing the icon on the appliance.
With the Sleepmapper app you can set different wake-up profiles.
You can choose between three options. Select one of the natural
sounds , no sound or the FM radio
In the event of a power failure, all functions of the appliance, including
the display, do not work. However, the internal clock and a back-up
alarm remain active for at least 8 more hours.
If during the power failure the set alarm time is due, a back-up alarm
goes off generating a beeping sound for approximately 1 minute.
When the wake-up curve has ended (when the set maximum light
intensity has been reached) and the alarm sound is playing, you can
tap the top of the appliance to snooze.
The lamp stays on, but the sound is muted. After 9 minutes, the alarm
sound starts playing again.
Note: The light and sound automatically turn off 60 minutes after the
alarm has gone off or 60 minutes after the last snooze action.
When the wake-up curve is active or the alarm goes off, you can
dismiss it by pressing this icon on the appliance. If you dismiss it, this
alarm profile is deactivated for that day.
.