Navigating The Menu - Philips HF367X Serie Manuel

English
12
AmbiTrack sensors
Setting up your appliance without the app
Hello

Navigating the menu

The connected Sleep & Wake-Up Light collects input from its
surroundings through the AmbiTrack sensors. AmbiTrack sensors
measure light, humidity, temperature and sound pressure. These
factors can influence your sleep. Only in the app you can see
information on the recommended values for ideal sleep conditions.
The measurements of the sensors can be influenced by the
surroundings of the connected Sleep & Wake-Up Light.
For example, if you place the appliance next to a window or near a
heating source such as a radiator, the temperature and humidity
sensors might not represent the temperature / humidity of the entire
room.
You can set up the Sleep & Wake-Up Light without the app. Before
you can use the appliance, a setup wizard on the appliance needs to
be completed first. You can connect the appliance to the app later
(see 'Easy Wi-Fi setup').
We strongly recommend you to set up your appliance with the
SleepMapper app in order to enjoy all functionalities the app offers.
1 Start the setup wizard by tapping on the start icon on the display of
the appliance.
2 You will be guided through the setup wizard on the appliance,
where you set the desired settings, a wake-up profile and a
winddown program.
Note: The wake-up profile and the wind-down program can be set
later. Skip these settings by tapping the arrow repeatedly. However,
we advise you to set your wake-up profile and your wind-down
program during this setup. This can help you explore the different
functions of the appliance.
If you have set up your appliance with the help of the SleepMapper
app (see 'Easy Wi-Fi setup') or through the setup wizard (see 'Setting
up your appliance without the app') on the appliance, you will see the
menu as described in the following sections.
On the display of the appliance you can select and set the wake-up
profile, reading light, settings, sound (source) or the unwind program.