Télécharger Imprimer la page

Philips DC390 Mode D'emploi page 13

Masquer les pouces Voir aussi pour DC390:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 76
5 Listen to radio
Note
Only FM radio reception is available on this
unit.
Tune to a radio station
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
Note
For optimal reception, fully extend and adjust
the position of the antenna.
1
Press TUNER to select FM tuner.
2
Press and hold
seconds.
» [SRCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
/
repeatedly until you find optimal
reception.
Tip
[STEREO] is default setting for tuner mode.
Under tuner mode, you can press OK
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
EN
14
/
for more than 2
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
» [AUTO] (auto) is displayed.
» The unit automatically stores radio
stations with sufficient signal strength..
» The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press SET TIME/PROG to activate the
program mode.
3
Press / to select a number.
4
Press SET TIME/PROG to confirm.
5
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.
To select FM stereo or FM mono, press OK.
Select a preset radio station
1
Press / to select a preset number.

Publicité

loading

Ce manuel est également adapté pour:

Dc-390