Tools And Materials - Dometic 3300 Manuel D'installation Et D'utilisation

Pre-Installation
2 .9 Required Specifications
This section provides the operational specifications for
the vent fan and control.
Weight
Power Consumption
Output
Fan Height

2 .10 Tools and Materials

Dometic recommends the following tools and materials
to install the product:
Recommended Tools and Materials (not included)
Straight Edge
All-Weather Roof Sealant
Level
Putty Knife or Scraper
Screw Gun
8
12.0 lbs (5.4 kg)
36 W
<3 A
4 in. (101 mm) standard
Pencil or Pen
EPDM-Compatible Roof Sealant
Standard #2 Phillips Screwdriver
Measuring Tape
Wire Cutter/Stripper/Crimping Tool
Fan-Tastic Vent Fan
16-Gauge Stranded
Copper Wire (Minimum)
Utility Knife
Cordless Drill with 1/8 in. Drill Bit
Multimeter
OR
#8 x 3/8 in. Screws (x2) or
Removable Hanging Strip
(for the Remote Control Cradle)
EN