Télécharger Imprimer la page

Honeywell ADEMCO 6152 Guide De L'utilisateur page 5

Publicité

Pour activer le mode carillon vocal : Réglez le volume du clavier à « En » ou
« Check » (au volume désiré) et activez le mode carillon (code +
).
Le carillon vocal fournit une annonce vocale de l'état, un carillon et un
affichage quand une zone d'entrée/sortie du périmètre est ouverte.
Quand le mode vocal est désactivé mais que le mode carillon est activé,
l'avertisseur fournit quand même les annonces de carillon quand des
zones sont ouvertes.
État vocal
Le clavier peut être réglé pour annoncer l'état courant du système et afficher les
violations de système ou de zones (s'il y en a).
Pour activer l'état vocal : assurez-vous que le mode carillon vocal est activé,
ensuite :
Pour annoncer l'état : Appuyez une fois sur les touches
+
L'état du système est annoncé (p. ex., « Désarmé, Prêt à armer » ou
« Désarmé, Pas prêt à armer »).
Note : L'état ne peut pas être annoncé durant la période du délai de sortie.
Pour annoncer les zones ouvertes : Appuyez sur
et sur la touche
Jusqu'à 3 zones ouvertes sont annoncées avec leur descripteur
respectif, si programmé. Si les descripteurs de zones ne sont pas
programmés, les numéros des zones sont annoncés.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS
The user shall not make any changes or modifications to the equipment unless authorized by the
Installation Instructions or User's Manual. Unauthorized changes or modifications could void the
user's authority to operate the equipment.
Class B digital device Statement - This equipment has been tested to FCC requirements and has
been found acceptable for use. The FCC requires the following statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that
is, in strict accordance with the manufacturer's instructions, may cause interference to radio and
television reception. It has been type tested and found to comply with the limits for a Class B computing
device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• If using an indoor antenna, have a quality outdoor antenna installed.
• Reorient the receiving antenna until interference is reduced or eliminated.
• Move the radio or television receiver away from the receiver/control.
• Move the antenna leads away from any wire runs to the receiver/control.
• Plug the receiver/control into a different outlet so that it and the radio or television receiver are
on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA CLASS B STATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
.
une deuxième fois en 10 secondes.
- 5 -
+
+
+

Publicité

loading

Ce manuel est également adapté pour:

Ademco 6152vAdemco 6152zn