ReVent RVLH50 Mode D'emploi page 23

Using The Control
BLUE LED LIGHT: Lets you know when your fan is on (especially useful for fans
with low sound levels).
CONDENSATION SENSOR: Senses condensation
(humidity) in the room and turns your fan on and off
automatically.
TIMER AND SENSOR SETTINGS: Countdown timer
(left) and moisture sensitivity (right) settings (hidden
behind a removable cover).
FAN ON/OFF: Turns the countdown timer on and off (can be used to temporarily
override the CONDENSATION SENSOR).
Changing The Settings: By default, the CONTROL comes with the condensation
(humidity) sensitivity set to average levels, and the countdown timer set to
30 minutes. To change the settings, remove the TIMER AND SENSOR SETTINGS
cover by taking off the face plate and then inserting the end of the SETTINGS
TOOL (or a non-metal tool of your own) into the two holes on either side of the
CONTROL. Use the SETTINGS TOOL to turn the settings dials. The countdown
timer can be set between 5‒60 minutes. The CONDENSATION SENSOR can be
set at low, average, or high sensitivity. Once you change a setting, the changes will
take effect after the next on/off cycle, so it's recommended that you turn your fan on
then off after you make a change to the settings.
TIMER / MINUTERIE SENSIBILITÉ
BLUE LED LIGHT
CONDENSATION SENSOR
TIMER AND SENSOR SETTINGS
FAN ON/OFF
SETTINGS TOOL
use to remove cover and
adjust settings dials
22
SENSITIVITY