Warn 91270 Instructions D'installation page 5

5. Place bumper support (A3) into position. Use fasteners B2
and B3 to install bumper support to bumper winch mount
(A1). Do not tighten at this time.
6. Use fasteners B2 and B3 to install bumper support to
frame. Do not tighten at this time.
7. Install bumper tube (A5) to bumper (A4). Place tube (A5)
into position and install fasteners (B4).
©2013 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
B2 and B3
5
Figure 4
B2 and B3
Figure 5
Figure 6
91271A0